Clermont, FL · Garage Floor Coatings

Epoxy Flooring in Clermont, FL

Garage floors, lanais, and pool decks coated the right way: ground, tested, and priced in writing first.

9Towns served
7Coating services
8Project stories shown in full

A garage floor crew for Clermont and South Lake County

We coat garage floors across Clermont, from Kings Ridge and Legends to Sawgrass Bay and the Hancock Road corridor. Most jobs are two-car garages. The work is the same on each one: grind the slab, fix what is wrong with it, then coat it as one floor.

Florida slabs hide two traps. Moisture pushes up from the ground. Heat cooks tires all day on the road. A thin coat rolled on a smooth slab fails both ways. Our floors start with a diamond grind and a moisture test, so the coat has something real to hold.

You get a written price before work starts. No range that grows later. No add-ons you did not agree to. If the slab needs a moisture primer or crack work, you hear it at the estimate, not on install day.

Start with the garage floor coating page for the core job, or read the cost guide if price is your first question.

Which floor fits which space

Most homes pick one of three builds. Here is the plain split.

SpaceCommon pickWhy
Everyday garageFull-flake epoxyHides slab marks, adds grip, easy to clean
Sun-hit garage or lanaiPolyaspartic systemHolds color in sun and cures fast
Shop or work roomSolid-color epoxyClean look, low cost, tough skin
Pool deckPolyaspartic with gripMade for wet feet and full sun

Recent floors, town by town

Each story lists the town, the date, the size, and the price paid. Floors shown are representative of the work we do.

Same garage slab before coating, dull and stained
Finished coated garage floor in Clermont
BeforeAfter

Two-car garage, full-flake system

440 sq ft · Final price $3,480

This Kings Ridge garage had oil spots and a long crack by the door. We ground the slab, filled the crack, and ran a full-flake system with a clear polyaspartic top. The floor now wipes clean and the crack is sealed under the coat.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Polyaspartic coated three-car garage floor

Three-car garage, polyaspartic system

660 sq ft · Final price $5,610

A wide three-car slab with sun hitting the first six feet all day. We ground it open, used a polyaspartic system for sun stability, and kept the color even at the door line. The owners park on it daily.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Same small garage before coating, bare stained concrete
Small garage with fresh flake coating
BeforeAfter

One-car garage, full-flake redo

240 sq ft · Final price $1,940

A small garage where a store kit had peeled in sheets. We ground the old coat off, checked the slab for moisture, and laid a full-flake floor. Small floor, same prep as a big one.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Coated lanai floor in Groveland

Lanai floor, flake finish

200 sq ft · Final price $1,780

This screened lanai had plain, chalky concrete that showed every wet footprint. We ground it, added slip texture, and coated it in a light flake blend. It hoses off fast after rain.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Coated pool deck in Montverde

Pool deck, polyaspartic coating

600 sq ft · Final price $5,880

A sun-baked pool deck that got too hot and too slick. We ground the old surface, repaired two spalls, and laid a polyaspartic coat with grip texture. Bare feet do better on it now, wet or dry.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Metallic epoxy show garage floor in Windermere

Show garage, metallic floor

440 sq ft · Final price $4,290

A car collector wanted a floor with depth, not a plain color. After grinding and a moisture check, we laid a metallic floor in deep wine and charcoal tones. No two feet of it look the same.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.

How a job runs, step by step

Prep is most of the work. The coat at the end is the easy part to see, but the grind and the checks under it are what keep a floor down.

1

Look and measure

We measure the floor, read the slab, and test for moisture. You pick a system and a color from real samples. The price is written down before any work starts.

2

Diamond grind

We grind the whole slab with a diamond grinder and dust control. The pores open up. Old paint, sealer, and weak coats come off.

3

Repair the slab

Cracks get chased and filled. Pits and spalls get patched. Repairs are ground flush so they do not show as bumps.

4

Base coat and flake

The base coat goes down at full build. On flake floors, flake is spread by hand until the wet coat can hold no more.

5

Topcoat and walk-through

A clear topcoat seals the floor. We walk it with you and leave clear notes on when to walk and when to park.

Get a Free Estimate in Clermont

Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.

Rather talk? Call (352) 555-0171.

Questions we hear

How much does a garage floor cost?

Size, slab shape, and system set the price. Use the calculator on this page for a planning range. Your firm price comes after an in-person look, in writing, before work starts.

Will it peel like the kit floors do?

Kit floors peel because the slab was not ground and no one tested for moisture. We grind every slab and test before we coat. That is the whole ball game.

Will hot tires lift the coating?

Thin, soft coats can lift under hot tires in August heat. A full-build system with a hard topcoat is made to stand up to that. We spec the topcoat for Florida heat.

When can I walk on it and park on it?

Fast-cure coats are ready to walk on the same day in most cases. Cars take longer, often one to three days by system. Your exact times are confirmed in writing at the estimate.

My house is new. When can the garage be coated?

New concrete needs time to cure first, often about 30 days. New slabs also carry a sealer that must be ground off. Doing the floor before you move in is the cleanest path.

Do you coat lanais and pool decks too?

Yes. Outdoor concrete is a big part of our work here. Sun-stable coats with grip texture are the spec outside. See the patio, lanai, and pool deck page for detail.

Estimate Calculator

Pick your floor and its size. The range updates as you go.

Add-ons your floor may need

Your planning range —

Every floor is different. Slab condition moves the final number more than size does.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

Call (352) 555-0171 Estimate Calculator