Services · Clermont, FL

Epoxy Flooring in Clermont, FL

One silo, seven jobs. Every one starts with grinding and a moisture check.

Epoxy flooring is a resin coat built on ground concrete, not paint. A pro job grinds the slab open, fixes cracks, lays a thick base, and seals it with a hard topcoat. Done right, it lasts for years of daily use. Done fast, it peels.

Pick your job below. Each page covers the system, the steps, and what moves the price. The cost guide pulls the money side into one place.

Why prep decides the floor

Ask any coater what kills floors and you get one word: prep. A coat sticks to what it touches. Dust, sealer, oil, and smooth concrete all break the bond. Grinding solves all four at once.

Moisture is the second killer. Ground water pushes up through Florida slabs. We test before we coat. If the reading is high, a moisture primer goes down first. Skipping that step is how cheap floors blister.

  • Diamond grind on every job, never acid etch alone
  • Moisture test before the quote is final
  • Cracks and spalls filled and ground flush
  • Written price before work starts

Floors from across the area

Same garage slab before coating, dull and stained
Finished coated garage floor in Clermont
BeforeAfter

Two-car garage, full-flake system

440 sq ft · Final price $3,480

This Kings Ridge garage had oil spots and a long crack by the door. We ground the slab, filled the crack, and ran a full-flake system with a clear polyaspartic top. The floor now wipes clean and the crack is sealed under the coat.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Polyaspartic coated three-car garage floor

Three-car garage, polyaspartic system

660 sq ft · Final price $5,610

A wide three-car slab with sun hitting the first six feet all day. We ground it open, used a polyaspartic system for sun stability, and kept the color even at the door line. The owners park on it daily.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.
Same small garage before coating, bare stained concrete
Small garage with fresh flake coating
BeforeAfter

One-car garage, full-flake redo

240 sq ft · Final price $1,940

A small garage where a store kit had peeled in sheets. We ground the old coat off, checked the slab for moisture, and laid a full-flake floor. Small floor, same prep as a big one.

Representative job — an example of the work and pricing on this site, replaced with verified job records as they close.

Get a Free Estimate in Clermont

Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.

Rather talk? Call (352) 555-0171.

Questions we hear

How much does a garage floor cost?

Size, slab shape, and system set the price. Use the calculator on this page for a planning range. Your firm price comes after an in-person look, in writing, before work starts.

Will it peel like the kit floors do?

Kit floors peel because the slab was not ground and no one tested for moisture. We grind every slab and test before we coat. That is the whole ball game.

When can I walk on it and park on it?

Fast-cure coats are ready to walk on the same day in most cases. Cars take longer, often one to three days by system. Your exact times are confirmed in writing at the estimate.

Is it slippery when wet?

Flake adds texture on its own. On lanais, pool decks, and door lines we add grip texture to the topcoat. Tell us where feet get wet and we spec for it.

Will hot tires lift the coating?

Thin, soft coats can lift under hot tires in August heat. A full-build system with a hard topcoat is made to stand up to that. We spec the topcoat for Florida heat.

Estimate Calculator

Pick your floor and its size. The range updates as you go.

Add-ons your floor may need

Your planning range —

Every floor is different. Slab condition moves the final number more than size does.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

Call (352) 555-0171 Estimate Calculator